Low Voltage 1250A LCD Display Circuit Breakers

Low Voltage 1250A LCD Display Circuit Breakers

We are delighted to introduce the Saide® Low Voltage 1250A LCD Display Circuit Breakers. Hailing from the heart of manufacturing expertise in China, these circuit breakers are a testament to our commitment to providing innovative solutions at an affordable price point. As manufacturers, we take great pride in delivering products that not only meet rigorous industry standards but also offer exceptional value. These circuit breakers are designed to ensure the utmost safety and efficiency in your electrical systems. Thank you for considering Saide® as your trusted partner in electrical protection.

Normal work and installation conditions

1. The installation location's elevation should not exceed 2000 meters.

2. For the SDM6 thermomagnetic type, the ambient temperature range is from -5℃ to +40℃, with a 24-hour average temperature not exceeding +35℃. The air's relative humidity at the installation site should not surpass 50% at a maximum temperature of +40℃. In lower temperatures, higher humidity levels may be present. The average minimum temperature of the wettest month should not exceed +25℃, with a maximum relative humidity of 90%. Potential condensation on the product's surface due to temperature fluctuations should be taken into consideration.

3. The SDM6 intelligent type operates in a surrounding medium temperature range of -40℃ to +80℃.

4. The product is intended for use in environments free of explosive hazards. The media should not contain corrosive elements that can damage metals or insulating gases and conductive dust.

5. Installation sites should be shielded from direct rain and should not have water vapor accumulation.

6. The circuit breaker falls under Installation Category III.

7. Pollution level is categorized as Level 3.

8. The circuit breaker can be installed in a vertical (upright) or horizontal orientation.

9. Incoming power can be from either the upper or lower line.

10. Circuit breakers can be classified as either fixed or plug-in types.

Low Voltage 1250A LCD Display Circuit Breakers Specifications

1. The installation location's elevation should not exceed 2000 meters.

2. For the SDM6 thermomagnetic type, the ambient temperature range is from -5℃ to +40℃, with a 24-hour average temperature not exceeding +35℃. The air's relative humidity at the installation site should not surpass 50% at a maximum temperature of +40℃. In lower temperatures, higher humidity levels may be present. The average minimum temperature of the wettest month should not exceed +25℃, with a maximum relative humidity of 90%. Potential condensation on the product's surface due to temperature fluctuations should be taken into consideration.

3. The SDM6 intelligent type operates in a surrounding medium temperature range of -40℃ to +80℃.

4. The product is intended for use in environments free of explosive hazards. The media should not contain corrosive elements that can damage metals or insulating gases and conductive dust.

5. Installation sites should be shielded from direct rain and should not have water vapor accumulation.

6. The circuit breaker falls under Installation Category III.

7. Pollution level is categorized as Level 3.

8. The circuit breaker can be installed in a vertical (upright) or horizontal orientation.

9. Incoming power can be from either the upper or lower line.

10. Circuit breakers can be classified as either fixed or plug-in types.